Attachment F ACCESSING THE FCC NETWORK USING WINDOWS 95/98 FOR UNIVERSAL LICENSING SYSTEM FILING This attachment describes how to use Windows 95/98 Dial-Up Networking to establish a direct connection from your PC to the FCC Network and the Universal Licensing System (ULS) in order to file or review the Form 601. This involves configuring dial-up network access and then performing the direct dial-up procedure. This point-to-point connection is not routed through the Internet. Please note that a direct dial-up connection is not required to perform ULS online filing. You may file or review Form 601 on the Internet by entering http://www.fcc.gov/wtb/uls on your Netscape 4.7 Web browser and clicking the Online Filing button. Please also note that dial-up access to the FCC Network is not required to review FCC Form 175 applications. You can perform that function from the Internet, by entering location http://wtbwww15.fcc.gov/ on your Netscape 4.7 Web browser and clicking the 175 Review button. Conventions The instructions in this section use the following typographical conventions: bold Represents objects on the screen that you click with the mouse pointer, including buttons, Internet links, icons, tabs, menu items (e.g., Cancel button, Auctions link, Save option in the File menu). italic Represents field names or areas of a screen (e.g., Applicant field, Selected Licenses area of a screen). bold italic Represents characters that you must type exactly as they appear in the instructions. For example, if you are instructed to type http://wtbwww05.fcc.gov, you should type all of the characters shown in bold italic exactly as they are printed. SMALL CAPS Represents keys on the keyboard (e.g., ENTER, CTRL, ESC). Note: Throughout these instructions, "enter" means to type the appropriate information and then press the ENTER key. Hardware and Software Requirements To connect to the FCC Network using Windows 95/98 Dial-Up Networking requires at a minimum the following hardware and software: Hardware Requirements  CPU: Pentium or above  RAM: 16 MB (more recommended if you have multiple applications open)  Monitor: VGA or above  Modem: 14.4 Kbps, Hayes-compatible or faster (recommend 56.6 Kbps)  Mouse or other pointing device Software Requirements  Netscape Communicator 4.7 is recommended. However, you can also use Netscape Communicator 4.51 or 4.61. (Note that Netscape Communicator 4.6 and Netscape Communicator versions earlier than 4.51 are not compatible.) To download Netscape Communicator 4.7 free of charge, access the Netscape download site at http://home.netscape.com/download/.  Microsoft Windows 95/98 Note: If you are running Windows in a networked environment, check with your local network administrator for any potential conflicts with the Windows 95/98 Dial-Up Networking. This usually includes any TCP/IP installed network protocol.  Adobe Acrobat 3.0 Reader (or higher) is recommended as a plug-in to your browser. This provides a viewer for displaying files related to applications, such as attachments and exhibits. For best results, install the plug-in after you have installed the desired web browser. This will allow the plug-in to be fully integrated within the browser window. To download Adobe Acrobat version 3.0 or higher, access the Acrobat download site at http://www.fcc.gov/wtb/reader/. Configuring Dial-Up Networking 1. To start dial-up networking: a. Click the Windows 95/98 Start button. b. Click the Programs option to display the Programs menu. c. Click the Accessories option to display the Accessories menu. d. In Windows 95, click Dial-Up Networking. In Windows 98, click Communications, then Dial-Up Networking. If Dial-Up Networking is not an option on your Accessories menu, you should install it from your Windows 95/98 CD or diskettes. 2. When the Dial-Up Networking window appears, double-click the Make New Connection icon. The Make New Connection window appears. 3. In the field entitled Type a name for the computer you are dialing, type ULS at FCC. 4. In Windows 95, click the down arrow at the right of the Select a modem field and select your modem from the menu of available modems. In Windows 98, click the down arrow at the right of the Select a device field and select your modem from the menu of available devices. If your modem does not appear on this list, you must install your modem driver according to the modem manufacturer installation procedures, which are usually described in your modem's user manual. 5. Click the Configure button. Click the Options tab at the top of the Properties window. 6. In the Connection control area of the Options tab, verify that neither option is selected. If either option is selected, click the check box at the left of the option to deselect it. Then click the OK button. 7. Click the Next button. 8. Type 800 in the Area Code field and 844-2784 in the Telephone Number field. Verify that the correct country is selected in the Country code field. If necessary, click the down arrow at the right of the Country code field and select the appropriate country from the menu of available countries. 9. Click the Next button. 10. Click the Finish button. An icon titled ULS at FCC appears in the Dial-Up Networking window. 11. Verify that properties are configured correctly before attempting a dial-up session. Position the mouse pointer on the ULS at FCC icon and click the right mouse button to display a menu. Select Properties from the menu. 12. Click the Server Types tab at the top of the Properties window. 13. In the Advanced Options area, verify that only Enable software compression is selected. If it is not selected, click the check box at the left of the option to select it. If either of the other options is selected, click the check box to deselect it. 14. In the Allowed Network Protocols area, verify that only TCP/IP is selected. If it is not selected, click the check box at the left of the option to select it. If either of the other options is selected, click the check box to deselect it. 15. Click the TCP/IP Settings button. In the TCP/IP Settings window, confirm that the Server assigned IP address option is selected. Then, in the section beneath, select Specify name server addresses. 16. Type 192.104.54.1 as the Primary DNS. Make sure that these two options are checked: ? Use IP header compression ? Use default gateway or remote network 17. Click OK on the TCP/IP Settings window and the Server Type window. 18. a. Click the Windows 95/98 Start button, then click the Settings option to display the Settings menu. b. Click Control Panel and then double-click the Network icon. c. In the Configuration tab of the Network window, select TCP/IP and click the Properties button. (If there are multiple TCP/IP protocols, select TCP/IP, then highlight Dial-Up Adapter and click Properties.) d. Click the DNS Configuration tab. e. Select Enable DNS. Type bidder in the Host box, type fcc.gov in the Domain box, then type 192.104.54.1 in the DNS Server Search Order box and click the Add button. f. Click OK on the TCP/IP Properties windows, then click OK on the Network window. g. If you are prompted to restart your computer, click Yes to restart, then begin the Dial-Up Procedure. Dial-Up Procedure 1. If the Dial-Up Networking window is not currently open, do the following: a. Click the Windows 95/98 Start button. b. Click the Programs option to display the Programs menu. c. Click the Accessories option to display the Accessories menu. d. In Windows 95, click Dial-Up Networking In Windows 98, click Communications, then Dial-Up Networking. The Dial-Up Networking window appears. 2. Double-click the ULS at FCC icon in the Dial-Up Networking window. 3. Click the Connect button on the window. Do not enter User name and Password. The Connecting window appears, indicating the status of your connection as your modem dials into the system. This window must remain running during your dial-up session. You may minimize the window, if you wish. If your modem fails to establish a connection, please see the Troubleshooting section below. 4. Once the connection is established, open your Web browser. 5. In your browser's location field, enter http://wtbwww05.fcc.gov. If nothing appears in your Web browser, see the Troubleshooting section below. 6. When you have finished, exit the Web browser, then click the Disconnect button on the Connecting window to end your dial-up session. Troubleshooting Following are problems you may encounter and possible solutions for resolving or isolating them. Modem does not respond 1. Confirm that all physical connections for the modem are present. 2. Confirm that the phone line is active by connecting it to a telephone and checking for a dial tone. 3. Confirm that the correct modem driver is installed for your modem. Modem dials but does not connect 1. Confirm that the number the modem is dialing is correct. 2. Confirm that the modem prefix, if any, is correct. Modem dials and connects, but nothing appears when you enter the location in the Web browser 1. Check the settings in your dial-up networking icon, particularly that the Primary DNS is 192.104.54.1 and that TCP/IP is the only selected protocol. 2. Confirm that your web browser is not using proxies; it should be set to "direct connection to the Internet". 3. If you do log into a TCP/IP LAN, confirm that your LAN network IP address is being released. To do so, connect to the FCC Network using dial-up networking, then click the Start button in Windows 95/98 and select Run. Type winipcfg and press OK. If your IP address does not begin with "192.104.", then your LAN IP address is not being released. Click the Release All button, or consult your LAN administrator. Receive an Internal Server error in the Web browser 1. Confirm that the address entered in the location field is correct (http://wtbwww05.fcc.gov). 2. Confirm that Java and JavaScript are enabled in your Web browser, and confirm that Cookies is set to Accept All. Help For technical assistance with installing or using FCC software, contact the FCC Technical Support Hotline at (202) 414-1250 (voice) or (202) 414-1255 (TTY). The FCC Technical Support Hotline is generally available Monday through Friday, from 8 a.m. to 6 p.m. ET. All calls to the FCC Technical Support Hotline are recorded. F - 7